Agilent IDP-3 Mode D'emploi page 138

Instructions for Use
Safety
This section contains the information, prescribed by the Low Voltage Directive
2014/35/EU, which is essential for the compliance and observance of the safety
regulations both generally and in relation to the specific use of the product.
Failure to comply with these instructions and the other instructions contained in this
manual may render the safety conditions envisaged in the design phase inefficient and
cause accidents to those operating the product.
Agilent Technologies declines all responsibility for damage to the product or for the
physical safety of the operator or third parties deriving from the non-observance of the
safety rules indicated in the technical documentation.
Proper use
This manual contains important warnings and safety instructions to be observed in
order for the unit to work safely.
The product described in this manual is intended exclusively for the area of
application specified in the instructions. The manual also provides indications
regarding the essential requirements for the application and operation of the
product as well as the safety measures that can be adopted to guarantee regular
operation. Agilent Technologies does not provide any guarantee or assume any
responsibility for applications other than those described in this manual or in which
the essential requirements and safety measures are not respected.
The product must only be used by qualified personnel who are able to take the
necessary safety measures under conditions that do not cause damage or injury.
Any accessories and equipment used with the product must be supplied or
approved by Agilent Technologies. Any adjustment or maintenance operation must
be performed by a professional technician informed about the risks.
Repairs on the product must be carried out exclusively by Agilent authorized
personnel.
138