Agilent IDP-3 Mode D'emploi page 142

Instructions for Use
Product Description
This equipment is designed for use by trained personnel. The user should read this
instruction manual and any other additional information supplied by Agilent before
operating the equipment. Agilent will not be held responsible for any events that
occur due to non-compliance with these instructions, improper use by untrained
persons, non-authorized interference with the equipment, or any action contrary to
that provided for by specific national standards.
The IDP-3 is a hermetic, dry scroll vacuum pump. This pump is suitable for
pumping air or inert gases. This pump is not intended to pump corrosive,
pyrophoric, particulate-forming gases or gas mixtures in their flammable and/or
combustible range.
The following paragraphs contain all the information necessary to guarantee the
safety of the operator when using the equipment. Detailed information is supplied
in "Technical Information".
Transport & Storage
When transporting and storing the pump, the following environmental requirements
should not be exceeded:


142
Temperature:
Relative humidity:
-20 °C to +60 °C (-4 °F to 140 °F)
0 to 95% (non-condensing)