Automatic Ice Maker - GE DFE Série Manuel D'utilisation Et Instructions D'installation

Automatic Ice Maker

A newly installed refrigerator may take 12 to 24 hours to begin making ice.
Automatic Ice maker*
The ice maker will produce seven cubes per cycle
approximately 100–130 cubes in a 24-hour period,
temperature, number of door openings and other use
conditions.
hours to begin making ice cubes.
connection is made to the unit or if the water supply to
an operating refrigerator is turned off, make sure that
the ice maker is turned off. Once the water has been
connected to the refrigerator, the ice maker may be
turned on. See the table below for details.
fills with water.
Throw away the first few batches of ice to allow the
water line to clear.
Be sure nothing interferes with the sweep of the feeler
arm.
How to Turn the Ice Maker On/Off
Control Style A
Control Style B, C
Ice Bucket and Dispenser*
• Open the ice box door on inside of the left door.
• Pull up and out on the ice bucket in the left hand door
to remove it from the compartment .
• To replace the ice bucket, set it on
the guide brackets and push until
the ice bucket seats properly.
clockwise.
Lift and pull
49-60792-1
Model #
pages 10 & 11.
GNE29, PWE23
pages 10 & 11.
When the bin fills to
the level of the feeler
arm, the ice maker
will stop producing
several cubes to be
joined together.
frequently, old ice
cubes will become
cloudy, taste stale and shrink.
NOTE:
pressure, you may hear the ice maker cycle multiple
times when making one batch of ice.
CAUTION
avoid contact with the moving parts of the ejector
mechanism, or with the heating element that releases
automatic ice making mechanism while the refrigerator is
plugged in.
Ice Maker
(Available on Non Dispense models,
also available as IM Kit for some models)
drawer.
• The ice bucket
is located on
the left side
of the upper
basket.
Bucket
• Pull the upper
basket forward
to remove the
ice bucket.
maker
Controls, pages 10 & 11.
Controls,
Controls,
*Select Models Only
23