Automatic Ice Maker - GE Appliances Cafe CFE Serie Manuel D'utilisation Et D'installation

Automatic Ice Maker

A newly installed refrigerator may take 12 to 24 hours to begin making ice.
Automatic Ice maker*
The ice maker will produce seven cubes per cycle
approximately 100–130 cubes in a 24-hour period,
temperature, number of door openings and other use
conditions.
hours to begin making ice cubes.
connection is made to the unit or if the water supply to
an operating refrigerator is turned off, make sure that
the ice maker is turned off. Once the water has been
connected to the refrigerator, the ice maker may be
turned on. See the table below for details.
fills with water.
Throw away the first few batches of ice to allow the
water line to clear.
Be sure nothing interferes with the sweep of the feeler
arm.
When the bin fills to the level of the feeler arm, the ice
cubes to be joined together.
Control Style A
Control Style B
Ice Bucket and Dispenser*
• Open the ice box door on inside of the left door.
• Pull up and out on the ice bucket in the left hand door
to remove it from the compartment .
• To replace the ice bucket, set it on the guide brackets
and push until the ice bucket seats properly.
turn clockwise.
Lift and pull
*Select Models Only
49-60791-2
cloudy, taste stale and shrink.
NOTE:
pressure, you may hear the ice maker cycle multiple
times when making one batch of ice.
CAUTION
avoid contact with the moving parts of the ejector
mechanism, or with the heating element that releases
automatic ice making mechanism while the refrigerator is
plugged in.
How to Turn the Ice Maker On/Off
Model #
CWE
Freezer Ice Bucket*
• The ice bucket is located on the left side of the upper
basket.
• Pull the upper basket forward to remove the ice bucket.
Bucket
maker
21