Registers And Frame Description; Configuration And Installation; Preparation; Dismantling The Case - ADEUNIS PULSE IP68 V4 Sigfox RC1 Guide Utilisateur

sigfox RC1 PULSE IP68 - Guide utilisateur / User guide version V4.0.0
3.

REGISTERS AND FRAME DESCRIPTION

To know the content of the registers and of each frames (uplink and downlink) of the product, refers to the TECHNICAL REFERENCE MANUAL
of the PULSE product, available on the adeunis website:

4. CONFIGURATION AND INSTALLATION

To configure the product, it is recommended to use the IoT Configurator (android and Windows application).
- Google Play : https://play.google.com/store/apps/details?id=com.adeunis.IoTConfiguratorApp
- Windows 10: https://www.adeunis.com/telechargements/
To configure the product using AT Command or install the product, please refers to the INSTALLATION GUIDE adeunis® available on the
website.

5. PREPARATION

5.1. Dismantling the case

The product is supplied disassembled such that the lower electronic part can be accessed. This part is where the meter or meters are connect-
ed to the screw terminals and where the micro USB port for configuration can be accessed.
Once connection of the meters has been finalized and configuration carried out, the case may be closed (be careful that the O-ring seal is not
twisted).

5.2. Installation of the compression seal

Before connecting your meter cables to the product's screw terminals, you must insert the compression gland nut and the appropriate seal for
your configuration.
3 types of seals are supplied with the SIGFOX PULSE to allow sealing: for a 5 mm diameter cable, for a 3 mm diameter cable, for 2 x 2.2 mm
cables.
Seal for 1 x 5 mm cable
Assembly procedure:
1 - Your meter 2 - Pass the
and its inter- cable through
face. the compres-
sion gland nut.
https://www.adeunis.com/en/produit/pulse-impulse-interface/
Seal for 1 x 3 mm cable Seal for 2 x 2.2 mm cables
3 - Pass the 4 - Pass the
cable through cable through
the compression the case plate.
gland seal
5 - Connect the
ends of the meter
cable to the screw
terminals.
Page 49 of 52
FR
EN