Application Operation; Periodic Transmission - ADEUNIS PULSE IP68 V4 Sigfox RC1 Guide Utilisateur

sigfox RC1 PULSE IP68 - Guide utilisateur / User guide version V4.0.0

2.2. Application operation

2.2.1 Periodic transmission

The product allows the measurement and the periodic transmission of the values of the sensors according to the following diagram:
Period
No
reached
?
Yes
Number of
savings be-
fore sending
=1?
Yes
Send frame 0x46
Eg:
Register Value encoding
S301 Decimal
S321 Decimal
S320 Hexadecimal
S322 Hexadecimal
N.B: for a periodical transmission without historisation of the data, S301 must be egal to 1.
Product in standby
Detected
and validat-
ed pulse
?
Counting
of the impulse
No
See paragraph about periodical
transmission with historic
Value
1
43200
0x39
0x57
The settings associated with this mode of operation
are:
• Transmission frequency (register S301)
No
• Historisation period of the data (register S321)
• Enabling and Configuring inputs (register S320)
• Anti-bounce timer period (registers S322)
Yes
Result
Number of historisation (savings) to be done before sending
Period of historisation/saving of the data (43200x 2 seconds = 24h).
Channel A :
• Activated
• Meter other than gas
• Tamper input activated
Channel B :
• Activated
• Gas meter
• Tamper input disabled
Anti-rebound :
• Channel A = 500ms
• Channel B = 100ms
FR
EN
Page 41 of 52