CYBEX gold ATON G SWIVE Mode D'emploi page 74

2. With Harness Buckle installed into
Harness Buckle Cover A
appropriate slot in Seat Cover B
corresponding slot in Seat Shell (see pg.
67).
Ensure that end of Harness Buckle
Cover is positioned towards back of seat
as shown C .
C
3. Snap the four snaps at the inside center
of the Seat Cover.
4. Attach the Seat Cover to the top of the
plastic shell, then replace the Canopy
fabric.
74
Removing and Replacing Seat Cover
, insert through
A
and
B
B B
A A
C C