CYBEX gold ATON G SWIVE Mode D'emploi page 60

Installing and Removing the Infant Car Seat ONLY
Installing the Infant Car Seat With Lap Belt Only
WARNING!
!
ALWAYS have the Handle in a LOCKED position while using this Child Restraint in a
vehicle (see pg. 26).
1. Position Infant Car Seat firmly against
the back of the rear vehicle seat as
shown.
2. Route vehicle Lap Belt through the
blue INFANT CAR SEAT LAP BELT
GUIDES and BUCKLE THE BELT.
3. Push Infant Car Seat firmly into vehicle
seat, pressing down near the Buckle
Strap between the child's legs, while
removing slack from the Lap Belt. If
necessary, tuck the loose end of the Lap
Belt out of the way.
60
DEATH or SERIOUS INJURY can occur.
q q
w w
CLICK!