CYBEX gold ATON G SWIVE Mode D'emploi page 67

1. To reposition Buckle
Strap, loosen
Harness Straps and
hook Harness Buckle
Tongues over Lap
Belt Guides to get
them out of the way.
2. Remove Buckle
Strap Anchor from its
position at bottom of
Carrier and push up
through slot to top of
seat.
3. Insert Buckle Strap
Anchor and Harness
Buckle Cover into
slot that is closest to,
but NEVER under,
the child. Ensure
that Buckle Strap
Anchor feeds through
Seat Cover into
corresponding slot in
Seat Shell.
Changing the Buckle Strap Position
4. Make sure
Buckle Strap
Anchor is
completely
through slot
and is lying flat
against bottom
of seat.
5. Pull up on Buckle
Strap to make
sure it is securely
fastened.
6. Ensure that end
of Harness Buckle
Cover is positioned
towards back of seat
as shown.
67