Sony MEX-N6002BD Mode D'emploi page 28

HUB NO SUPRT: USB hubs are not supported.
IPD STOP: iPod playback has finished.
 Operate your iPod/iPhone to start playback.
OVERLOAD: The USB device is overloaded.
 Disconnect the USB device, then press SRC to
select another source.
 The USB device has a fault, or an unsupported
device is connected.
READ: Now reading information.
 Wait until reading is complete and playback
starts automatically. This may take some time
depending on the file organization.
USB ERROR: The USB device cannot be played.
 Connect the USB device again.
USB NO DEV: A USB device is not connected or
recognized.
 Make sure the USB device or USB cable is securely
connected.
USB NO MUSIC: There is no playable file.
 Connect a USB device containing playable files
(page 23).
USB NO SUPRT: The USB device is not supported.
 For details on the compatibility of your USB
device, visit the support site on the back cover.
or : The beginning or the end of the
disc has been reached.
(underscore): The character cannot be
displayed.
For RDS/DAB operation:
NO AF: No alternative frequencies.
 Press SEEK +/– while the program service name is
flashing. The unit starts searching for another
frequency with the same PI (program
identification) data ([PI SEEK] appears).
NO DATA: No DAB service for the selected program
type.
 Press
(back).
NO INFO: No label information for the current DAB
service.
NO SERV: The DAB signal cannot be received.
 Perform an auto scan (page 11).
 Check the connection of the DAB antenna
(aerial).
 Check that [SET ANT-PWR] is set to [ON]
(page 19).
28
GB
NO TP: No traffic programs.
 The unit will continue searching for available TP
stations.
RECEIVING: The DAB band is selected and the unit
is waiting to receive a service.
For BLUETOOTH function:
BTA NO DEV: The BLUETOOTH device is not
connected or recognized.
 Make sure the BLUETOOTH device is securely
connected, or the BLUETOOTH connection is
established with the BLUETOOTH device.
ERROR: The selected operation could not be
performed.
 Wait for a while, then try again.
NO DEVICE: The BLUETOOTH device supporting
HFP (Handsfree Profile) is not connected or
recognized.
 Make sure the BLUETOOTH device is securely
connected, or the HFP connection is established
with the BLUETOOTH device.
UNKNOWN: A name or phone number cannot be
displayed.
WITHHELD: The phone number is hidden by the
caller.
For SongPal operation:
APP --------: A connection with the application is
not established.
 Make the "SongPal" connection again (page 16).
APP DISCNCT: The application is disconnected.
 Make the "SongPal" connection (page 16).
APP DISPLAY: A screen setting display of the
application is open.
 Exit the screen setting display of the application
to enable button operation.
APP LIST: The contents list of the CD/USB is open.
 Exit the list of the application to enable button
operation.
APP MENU: A setting display of the application is
open.
 Exit the setting display of the application to
enable button operation.
APP NO DEV: The device with the application
installed is not connected or recognized.
 Make the BLUETOOTH connection and establish
the "SongPal" connection again (page 16).