Medion LIFE X44022 Mode D'emploi page 175

Setting
METERING
EXPOSURE
BRACKETING
AF AREA
AF LAMP
176 of 434
Symbol
This function allows you to determine the range for measuring
light for the photos or video recordings.
Selects an exposure based on the measurement
results at several points in the shooting range.
The light in the entire shooting range is
measured but the measurement is weighted
towards the values near the centre.
An exposure is selected on the basis of one
single measurement in the centre of the picture.
Use this feature to take photos with different exposure
compensation levels. When using bracketing, a series of 3 photos
are taken in the following order: standard exposure, under-
exposed and over-exposed.
Off
±0.3 Aperture level
±0.7 Aperture level
±1.0 Aperture level
Here you can select the autofocus (AF) range.
The camera automatically recognizes faces.
The camera focuses on a wide area.
The camera focuses on the image centre.
The camera focuses on the moving subject and
the focus is automatically maintained.
Here you can set the AF light to automatic mode
(AUTOMATISCH) or switch off the AF light (AUS).
Meaning