Publicité
Les langues disponibles
Les langues disponibles
UNPACKING
This griddle top was inspected before leaving the factory. The carrier assumes full responsibility for the
safe delivery upon acceptance of the shipment. Check for possible shipping damage immediately after
receipt.
If the griddle top is found to be damaged, complete the following steps:
1.
Carrier must be notified within 5 business days of receipt.
Carrier's local terminal must be notified immediately upon discovery (note time, date, and
2.
who was spoken to), and follow up and confirm with written or electronic communication.
3.
All original packing materials must be kept for inspection purposes.
4.
The griddle top cannot have been moved, installed, or modified.
5.
Notify Vulcan Customer Service immediately at 800-814-2028.
Check that the following have been included:
Bumper stop assembly(see page 16)
o (4) Bumper stop assembly mounting screws
(2) Mounting plates (see page 14)
o (4) M10 mounting plate screws
o (4) M10 mounting plate lock washers
Teflon sheet kit (see page 6)
o (2) Teflon sheets
o (2) Teflon clips
o Teflon bracket
The VMCS mounting bracket (see page 11) is a separate accessory and shipped in
another package. It is recommended that you specify factory mounting of the br acket if
you are purchasing a new griddle with the VMCS Heavy Duty Electric Griddle Top.
The griddle and its parts are hot. Use care when operating, cleaning
or servicing the griddle.
Disconnect power supply and follow lockout / tagout procedures
before cleaning and servicing the appliance.
BEFORE FIRST USE
Remove all packaging material and protective plastic from the unit. It is recommended
that you clean your Vulcan VMCS griddle top thoroughly with a mild soap and water. Wipe
the griddle surface thoroughly with water and wipe dry with a soft clean cloth.
SEASONING THE GRIDDLE
Each time, before turning the unit on, apply high temperature cooking oil – about two
ounces per VMCS top plate. Work the oil into the whole griddle surface.
4
-
-
Publicité
