Publicité
Les langues disponibles
Les langues disponibles
Fig. 13
Fig. 14
Lower Pivot Rod
Spring Assembly
Fig. 15
14. Place cardboard or other protective
covering on the gas griddle surface to
prevent scratching.
safely supported and steps 15 through 20
are accomplished with aid of a second
person.
15. Remove top and rear spring armature
covers. Set into place in the raised
position. Fig. 13.
16. Remove the four retaining clips that
secure the lower pivot rod. Fig 14.
17. Remove the lower pivot rod, then
remove the spring assembly as shown
in Fig 15.
15
-
-
Ensure that the unit is
Publicité
