Publicité
Les langues disponibles
Les langues disponibles
Fig. 16
Fig. 17
Fig. 18
safely supported and steps 15 through 20
are accomplished with aid of a second
person.
to the mounting bracket screws in steps 18
and 19.
18. Insert and tighten the bottom mounting
bracket screws and washers. Fig.16.
Ensure the mounting screws fully
engage the mounting plate that is
referenced in steps 12 and 13.
19. Set unit to lowered position as shown in
Fig C on page 6. Insert and tighten the
top
washers. Fig.17.
Ensure
engage the mounting plate that is
referenced in steps 12 and 13.
Recheck and tighten bottom mounting
screws as necessary.
20. Reverse steps 16 and 17 to reinstall the
spring assembly, lower pivot rod and four
retaining clips. Fig.18
16
-
-
Ensure that the unit is
Apply a thread locking compound
mounting
bracket
the
mounting
screws
and
screws
fully
Publicité
