Table des Matières
Publicité
Liens rapides
All manuals and user guides at all-guides.com
INSTALLATION &
OPERATION MANUAL
GAS TILTING BRAISING PAN
MODEL VGCTS16
MODELS
VGCTS16
ML-152053
Model VGCTS16
For additional information on Vulcan or to locate an authorized parts
and service provider in your area, visit our website at www.vulcanequipment.com
VULCAN
3600 NORTH POINT BLVD.
DIVISION OF ITW FOOD EQUIPMENT GROUP, LLC
BALTIMORE, MD 21222
WWW.VULCANEQUIPMENT.COM
FORM 31041 Rev. A (May 2018)
Publicité
Table des Matières
Manuels Connexes pour Vulcan VGCTS16
Sommaire des Matières pour Vulcan VGCTS16
- Page 1 MODEL VGCTS16 MODELS VGCTS16 ML-152053 Model VGCTS16 For additional information on Vulcan or to locate an authorized parts and service provider in your area, visit our website at www.vulcanequipment.com VULCAN 3600 NORTH POINT BLVD. DIVISION OF ITW FOOD EQUIPMENT GROUP, LLC BALTIMORE, MD 21222 WWW.VULCANEQUIPMENT.COM...
-
Page 2: Important
READ THE INSTALLATION, OPERATING AND MAINTENANCE INSTRUCTIONS THOROUGHLY BEFORE INSTALLING OR SERVICING THIS EQUIPMENT. IN THE EVENT OF A POWER FAILURE, DO NOT ATTEMPT TO OPERATE THIS DEVICE. RETAIN THIS INSTRUCTION MANUAL FOR FUTURE REFERENCE ©VULCAN, 2018 – 2 –... -
Page 3: Table Des Matières
All manuals and user guides at all-guides.com TABLE OF CONTENTS GENERAL ................................4 INSTALLATION ..............................4 Unpacking ................................4 Location ................................4 Installation Codes and Standards ........................5 Leveling ................................5 Gas connections ..............................5 Testing the Gas Supply System ........................5 Ventilation ................................6 Electrical connections ............................6 OPERATION .................................7 Controls (Fig. -
Page 4: General
Your Vulcan Tilting Braising Pan is a versatile piece of equipment. It allows you to stew, simmer, pan fry, braise, grill, or sauté, and all with a very uniform heat pattern. Capacity of Model VGCTS16 is 16 gallons (4.2 liters). The braising pan includes a support stand with drain pan. -
Page 5: Installation Codes And Standards
All manuals and user guides at all-guides.com INSTALLATION CODES AND STANDARDS Your Vulcan tilting braising pan must be installed in accordance with: In the United States: 1. State and local codes, or in the absence of local codes, with: 2. National Fuel Gas Code ANSI-Z223.1 (latest edition), available from The American Gas Association, Inc., 1515 Wilson Boulevard, Arlington, VA 22209. -
Page 6: Ventilation
All manuals and user guides at all-guides.com VENTILATION DO NOT obstruct the flow of flue gases from the flue located on the rear of the braising pan. It is recommended that the flue gases be ventilated to the outside of the building through a ventilation system installed by qualified personnel. -
Page 7: Operation
All manuals and user guides at all-guides.com OPERATION The tilting braising pan and its parts are hot. Use care when operating, cleaning or servicing the tilting braising pan. CONTROLS (Fig. 1) Fig. 1 Thermostat — Maintains set temperature by controlling power supply. Temperature range is from Off to 450°F (232°C). -
Page 8: Lighting The Tilting Braising Pan
All manuals and user guides at all-guides.com LIGHTING THE TILTING BRAISING PAN 1. Open main gas valve. 2. Ensure braising pan is in the DOWN position. 3. Turn Power Switch ON. Set thermostat dial to desired setting. This will turn on the electronic ignition. The gas solenoid valve will open, supplying gas to the burner. -
Page 9: Cleaning
All manuals and user guides at all-guides.com CLEANING Disconnect the electrical power to the machine and follow lockout / tagout procedures before cleaning. Do not use corrosive cleaning agents AFTER EACH USE The tilting braising pan should be cleaned after each use. Clean with warm water and a mild detergent. Rinse thoroughly and wipe dry with a soft clean cloth. -
Page 10: Stainless Steel Equipment Care And Cleaning
All manuals and user guides at all-guides.com STAINLESS STEEL EQUIPMENT CARE AND CLEANING (Supplied courtesy of NAFEM. For more information, visit their web site at www.nafem.org) Contrary to popular belief, stainless steels ARE susceptible to rusting. Corrosion on metals is everywhere. It is recognized quickly on iron and steel as unsightly yellow/orange rust. - Page 11 All manuals and user guides at all-guides.com Treat your water. Though this is not always practical, softening hard water can do much to reduce deposits. There are certain filters that can be installed to remove distasteful and corrosive elements. To insure proper water treatment, call a treatment specialist.
-
Page 12: Maintenance
Periodically check the flue, when the braising pan is turned off and is cool, to be sure it is free of obstructions. SERVICE AND PARTS INFORMATION To obtain service and parts information concerning this unit, contact the Vulcan Service Agency in your area, or visit www.vulcanequipment.com. - Page 13 All manuals and user guides at all-guides.com...
- Page 14 All manuals and user guides at all-guides.com...
- Page 15 All manuals and user guides at all-guides.com...
- Page 16 All manuals and user guides at all-guides.com...
- Page 17 All manuals and user guides at all-guides.com...
- Page 18 All manuals and user guides at all-guides.com...
- Page 19 All manuals and user guides at all-guides.com...
- Page 20 All manuals and user guides at all-guides.com...
- Page 21 All manuals and user guides at all-guides.com...
- Page 22 All manuals and user guides at all-guides.com...
- Page 23 All manuals and user guides at all-guides.com...
- Page 24 All manuals and user guides at all-guides.com...