Bernard Controls AQ Logic RANGE Instructions De Mise En Service page 22

All manuals and user guides at all-guides.com
How to change the Bluetooth
®
 Bluetooth
mode.
1. Go to Settings > Actuator's access code.
Actuator's access codes screen appears.
2. Depending on the access code you need to change:
• choose Access code to Read & Write
• else choose Access code to Read only
3. Set each digit value with
4. When all digits are set, select Save and validate with OK.
5. Go back to the root menu or quit the settings with several
ESC.
® access codes with Control panel
access codes can only be changed using Read & Write
English

, and validate with OK.
or

22
22