Maintenance And Repair - Waldmann ABLTL 1 Mode D'emploi

GB Instructions For Use Machine Light ABLTL 1

Maintenance and repair

! WARNING
Danger due to electrical shock
in case of contact!
Maintenance or repair work carried
out incorrectly may result in serious
injuries or death.
¾ Disconnect the light from the
mains before carrying out any
maintenance or repair work!
¾ Maintenance and repair work
must be carried out by a skilled
electrician only!
¾ Only parts released by the
manufacturer may be used as
spare parts!
Maintenance
The light module ist maintenance-
free.
NOTICE
Loss in tightness!
The main parts of the light module
are bonded to each other. When the
two parts are separated from one
another, tightness may get lost.
¾ Do not separate the light parts
from one another!
Defective light source
The light works with one
light emitting diode (LED).
The useful life of LEDs exceeds by
far that of conventional lamps (e.g.
light bulbs). Therefore, a replace-
ment of the light source is rarely
necessary.
If nevertheless the LED should
break down, the entire LED module
[Fig. 17] must be replaced. To do
so, send the complete light to
the manufacturer.
Fig. 17
27