Stihl HL 100 Notice D'emploi page 12

English
Horizontal Cut (with straight cutter bar)
Cutting without standing directly next to
the hedge, e.g. flowerbed between
operator and hedge.
Hold the cutter bar at an angle of 0° to
10° as you swing the hedge trimmer
horizontally.
Swing the cutter bar in an arc towards
the outside of the hedge so that the
cuttings are swept to the ground.
10
All manuals and user guides at all-guides.com
Approved Power Tool
Attachments
The following STIHL attachments may
be mounted to the basic power tool:
FH
FCS
KB
Interchangeable
Attachment
1) 2)
FCS
1) 2)
FH
HL 0°
HL 135°
1) 3)
HT
1) 2)
BF
KB (4601)
KW (4601)
1)
Must not be mounted to versions
HT
with short shaft (HL 100 K)
2)
Loop handle required
3)
May be mounted to versions with
handle hose and long shaft
(HL 100)
BF
KW
Application
Edger
Power scythe
Long reach hedge
trimmer
2)
Long reach hedge
trimmer
Pole pruner
Pick tines
1) 2)
Bristle brush
1) 2)
PowerSweep
HL 100, HL 100 K