Audio Delay; Manual Setup; Display - Denon AVR-1611 Manuel De L'utilisateur

ENGLISH
Audio Adjust
RESTORER
Compressed audio formats such as MP3, WMA (Windows Media Audio) and MPEG-4 AAC reduce the
amount of data by eliminating signal components that are hard for the human ear to hear. The RESTORER
function generates the signals eliminated upon compression, restoring the sound to conditions near those
of the original sound before compression. It also corrects the sense of volume of the bass to obtain richer
sound with compressed audio signals.
OFF : Do not use RESTORER.
Mode 1 (RESTORER 64) : Optimized mode for compressed sources with very weak highs.
Mode 2 (RESTORER 96) : Apply suitable bass and treble boost for all compressed sources.
Mode 3 (RESTORER HQ) : Optimized mode for compressed sources with normal highs.
• This item can be set with analog signals or when a PCM signal (fs = 44.1/48
kHz) is input.
• This cannot be set when the surround mode is set to "DIRECT".
• This item default setting for "iPod" is "Mode 3". All others are set to "OFF".
• When set to something other than "OFF",
RESTORER
• Pressing on the remote control unit or the main unit makes this
setting.
OFF Mode 1
(RESTORER 64)
Mode 3
(RESTORER HQ)

Audio Delay

While viewing video, manually adjust the time to delay audio output.
0ms – 200ms
• This item can be set within the range of 0 to 100 ms when "Auto Lip Sync" is set to "ON" and when
a TV compatible with Auto Lip Sync is connected.
• Store "Audio Delay" for each input source.
• Audio Delay for game mode can be set when "Video Mode" (vpage 42) is set to "Game".
48
Remote control operation
buttons
Setting details
is displayed.
Mode 2
(RESTORER 96)
Default settings are underlined.
Setting details
Move the cursor
(Up/Down/Left/Right)

Manual Setup

Set when changing Audyssey ® Auto Setup settings, or when changing the audio, video, display
or other settings.
• If you change the speaker settings after performing Audyssey Auto Setup, it will not be possible
to set MultEQ ® , Dynamic EQ ® and Dynamic Volume ® (vpage 46, 47).
• Can be used without changing the settings. Please set if necessary.
Menu operation
1
Press ZONE SELECT to switch the zone mode to "MAIN".
The "MAIN" indicator lights.
2
Press AMP to set the remote control unit to amplifier operation
mode.
3
MENU
Press .
The menu is displayed on the TV screen.
4
Press ui to select the menu to be set or operated.
5
Press ENTER to enter the setting.
RETURN
• To return to the previous item, press
MENU
• Exiting the Menu, press while the menu is displayed.
The menu display disappears.
Items that can be set with the Manual Setup procedure
Speaker Setup (vpage 49) HDMI Setup (vpage 51)
4-1.Speaker Setup 4-2.HDMI Setup
1.Amp Assign Auto Lipsync
2.Speaker Config. HDMI Audio Out : Amp
3.Bass Setting HDMI Control
4.Distance
5.Channel Level
6.Crossover Freq.
[ENT]:Select [RTN]:Back
ZONE2 Setup (vpage 53)
4-4.ZONE2 Setup
Level Lch : 0dB
Level Rch : 0dB
Vol.limit : OFF
Power On Lev: Last
Mute Lev. : Full
[RTN]:Back
Confirm the setting
.
Audio Setup (vpage 52)
4-3.Audio Setup
: ON 1.2ch Direct/Stereo
2.Auto Surround Mode
: OFF 3.EQ Customize
[RTN]:Back [ENT]:Select [RTN]:Back
Option Setup (vpage 53)
4-5.Option Setup
1.Volume Control
2.Source Delete
3.On-Screen Display
4.Remote Preset Codes
5.Quick Select Name
6.ZONE Rename

7.Display

[ENT]:Select [RTN]:Back
Return to previous menu