Connecting An External Control Device; Playback (Basic Operation); Important Information; Selecting The Input Source - Denon AVR-1611 Manuel De L'utilisateur

Connecting an external control
device
REMOTE CONTROL jacks
If this unit is installed in a location that is out of range of the signal
from the remote control unit, you can still operate the unit and the
devices connected to it by using a commercially available IR receiver.
You can also use it to remotely control ZONE2 (another room).
Infrared
Infrared
retransmitter
sensor
Device equipped with a
REMOTE CONTROL IN jack
Output
Input
AUX
OUT

Playback (Basic operation)

n Selecting the input source (vpage 19)
n Adjusting the master volume (vpage 20)
n Turning off the sound temporarily (vpage 20)
n Playing a Blu-ray Disc player/DVD player
(vpage 20)
n Playing an iPod ® (vpage 21)
n Tuning in radio stations (vpage 23)
Selecting a listening mode (Surround mode)
(vpage 24)
Playback (Advanced operation) (vpage 32)

Important information

Before starting playback, make the connections between the different
components and the settings on the receiver.
NOTE
Also refer to the operating instructions of the connected components
when playing them.

Selecting the input source

Press the input source select button
( iPod , DVD , BD , TUNER , DOCK , SAT/
CBL GAME V.AUX TV
, , , ) to be played
back.
The desired input source can be selected
directly.
iPod PLAY
• When is pressed, the input
source of this unit is switched to "DOCK"
and the connected iPod is automatically
played (vpage 22 "iPod play function").
You can also use the following operation to select an input
source.
ENGLISH
19