Denon AVR-1611 Manuel De L'utilisateur page 51

Setting items
Dynamic Volume ®
Midnight : Most adjustment to softest and loudest sounds.
Solve the problem of large Evening : Medium adjustment to loudest and softest sound.
variations in volume level Day : Least adjustment to loudest and softest sounds.
between TV, movies and OFF : Do not use the "Dynamic Volume".
other content (between
quiet passages and
• is displayed when set to "ON".
loud passages, etc.) by
automatically adjusting to
• If "Dynamic Volume" is set to "Yes" in Auto Setup (vpage 9), the
the user's preferred volume
setting is automatically changed to "Evening".
setting.
• Buttons on the remote control unit or main unit
can be used for operations.
GOperations with the remote control unitH
DYN EQ/VOL
Press
DYN EQ/VOL
Each time
changed as shown below.
Dynamic EQ : ON /
Dynamic Volume : Midnight
Dynamic EQ : OFF /
Dynamic Volume : OFF
GOperations with the main unitH
DYNAMIC VOLUME
Press
DYNAMIC VOLUME
Each time
pressed, the setting is changed as
shown below.
Dynamic Volume : OFF
Dynamic Volume : Day
Remote control operation
buttons
Setting details
.
is pressed, the setting is
Dynamic EQ : ON /
Dynamic Volume : Evening
Dynamic EQ : ON / Dynamic EQ : ON /
Dynamic Volume : OFF Dynamic Volume : Day
.
is
Dynamic Volume : Midnight
Dynamic Volume : Evening
Move the cursor
(Up/Down/Left/Right)
Manual EQ
Use the graphic equalizer to adjust the tone of each speaker.
"Manual EQ" can be set when "MultEQ ® " setting (vpage 46) is "Manual".
Setting items
Adjust CH q Select the speaker tone adjustment method.
Correct the tone of each
All CH : Adjust the tone of all speakers together.
speaker. L/R CH : Adjust the tone of left and right speakers together.
Each CH : Adjust the tone of each speaker.
w Select the speaker.
e Select the adjustment frequency band.
63Hz / 125Hz / 250Hz / 500Hz / 1kHz / 2kHz / 4kHz / 8kHz / 16kHz
• Select the speakers you want to adjust when "L/R" or "Each" is
selected.
r Adjust the level.
–20.0dB – +6.0dB (0.0dB)
Base Curve Copy Yes : Copy.
Copy "Audyssey Flat" curve No : Do not copy.
from MultEQ.
"Base Curve Copy" is displayed after Audyssey Auto Setup has been
performed.
Default Yes : Reset to the defaults.
The "Manual EQ" settings No : Do not reset to the defaults.
are returned to the default
settings.
Confirm the setting
ENGLISH
Audio Adjust
Default settings are underlined.
Setting details
47
Return to previous menu