Using The Player With Another Component; Controlling Another Cd Player (Advanced Mega Control) - Sony CDP-CX450 Mode D'emploi

Using the Player with Another Component

Controlling Another CD Player
(Advanced Mega Control)
This unit can control a second CD player (see
"Connecting another CD player" on page 6). Even
when a second CD player is connected, the controls on
both of the units will function. When you press the
play button on either unit, the operating player stops
and the idle player starts. Make sure that "2nd
DETECTED" appears in this player's display after
turning on both players. Note that, depending on the
player, you may not be able to operate all the functions
of the second CD player.
The controls indicated in the illustration below are
effective while the MEGA CONTROL button is lit.
To operate the master player, press MEGA CONTROL
so that the MEGA CONTROL button goes off, and to
operate the second player, press MEGA CONTROL so
that the MEGA CONTROL button lights up.
Play mode buttons
(CONTINUE/SHUFFLE/
MEGA
PROGRAM/REPEAT)
CONTROL
I / 1
X
H
PLAYER SELECT
PLAYER
MENU
TRACK
SELECT
PUSH ENTER
H
./>
m/M
CONTINUE SHUFFLE
PROGRAM REPEAT
NAME SCAN DISC
SKIP
SCROLL
Storing Information About CDs (Custom Files) Using the Player with Another Component
Storing Information About CDs (Custom Files)
JOG
MENU/NO
. AMS >
x
BACK
X
x
1
Press MEGA CONTROL on this player.
The MEGA CONTROL button and "2nd" in the
display light up. The display shows the current
disc number or Disc Name of the second player.
2nd NEXT DISC AT. HIT TRACK GROUP
* D I S C - 4
ALL 1 DISC S SHUFFLE REPEAT GROUP
PROGRAM 1 2 3 DELETE FILE FADE
MULTI CD TEXT HI LIGHT CD1 CD2 CD3
Current disc number or the Disc Name
2
Select the desired play mode.
To program tracks, use the controls on the second
player.
3
Press H on this player to start playing.
The play starts and the display shows the current
disc, track numbers, and the playing time of the
track.
While the MEGA CONTROL button is lit, you can
control the second player with the controls on this
player.
To control the master player again
Press MEGA CONTROL. The MEGA CONTROL button goes
off and you can control the master player.
To control the master player again by using the remote, you
have to reselect the master player by pressing PLAYER
SELECT on the remote.
To control the second player directly using the supplied
remote Z
While the MEGA CONTROL button is off, press PLAYER
SELECT repeatedly until "2nd player" appears in the remote's
display.
2nd PLAYER
CD 3 / 3 0 0 d i s c s
2 n d p l a y e r
To start playback, move the cursor to select the disc, then
press the Easy scroll key.
AT. MIN STEP SEC
* * * * * *
CD3
41 GB