Publicité
Les langues disponibles
Les langues disponibles
Maintenance
28
Brew group Washing
> maintenance > group wash
This function is used to clean the machine's internal circuits used for brewing coffee.
to rinse the brew group, simply clean with water as shown on page 30. this wash completes the
maintenance process of the brew group. We recommend performing this cycle on a monthly basis
(or every 500 coffees), using the saeco tablets, which can be purchased separately.
Note: before performing this function make sure that:
1. a large enough container is positioned under the spout;
2. the appropriate tablet for cleaning the brew group has been inserted into the pre-
ground bypass doser;
3. the water tank contains a suffi cient quantity of water.
the Wash cYcle cannOt Be interruPteD.
a PersOn Must Be Present During the OPeratiOn.
1
3.3.1
group wash
execute now
Please refer to page 23 to access
the "group wash" menu.
Press the
button to confi rm.
4
passage
[2/3]
You can check the status of the
cleaning cycle on the display.
2
insert tablet
and press start
Insert the cleaning tablet as
shown above.
Press
to start.
5
wash cycle completed
please wait
3
group wash
please wait
Wait for the cycle to begin.
6
3
maintenance
The brew group has been washed.
To exit the programming mode,
press the MENU button (see
page 21).
Publicité
