Philips Saeco Talea Ring Plus Mode D'emploi page 30

Insert the tank back onto the
machine.
13
rinse cycle
ok to start cycle
Rinse the machine's circuits by
pressing the button.
16
Turn the knob until it is in the rest
position ( ).
17
Adjust the drip tray (see page
11) and place a cup under the
dispensing spout.
After performing the descaling cycle, wash the brew group as described in the "Cleaning and Maintenance"
section.
14
rinse cycle
please wait
The machine performs the rinse
cycle.
During the rinse cycle, the
machine may require the water
tank to be fi lled.
Check the quantity of water contained in the tank
and, if desired, install the water fi lter again or re-insert
the small white fi lter (see page 8).
When descaling is complete, return to the main
menu to brew beverages.
18
pre-ground
espresso coffee 08:33
2.
1.
Select the function by pressing the
button until the pre-ground
coffee option appears.
Press the button twice
WITHOUT adding pre-ground coffee.
27
15
rinse cycle
completed
When the rinse cycle is fi nished
the above screen appears. Then
the display shows the maintenance
screen.
19
At the end of the dispensing
phase, empty the cup. Repeat the
operations from step 17 for 3 times
before brewing any products.