Publicité
Les langues disponibles
Les langues disponibles
Maintenance
26
4
open
water/steam knob
7
insert descaler
ok to start cycle
When the above message
appears, the boiler is at the right
temperature.
10
descaling cycle
please wait
The machine begins to dispense
the descaling solution through
the hot water/steam wand.
The dispensing occurs at
predetermined intervals, in order to
allow the solution to settle.
5
Place a container beneath the hot
water/steam wand.
8
Pour the entire content of the
Saeco concentrated descaling
solution into the water tank, and
then fi ll the tank with fresh drinking
water up to the MAX level.
Place the tank back into the
machine.
11
passage
[ 2/15]
The intervals are displayed in
order to check the progress of the
descaling cycle.
6
Turn the knob to the
position.
9
insert descaler
ok to start cycle
Press the
button to start.
When the solution is fi nished
the following message appears
on the display:
12
fill the
water tank
Remove the water tank, rinse
with fresh drinking water to
eliminate traces of descaling
solution, then refi ll with fresh
drinking water.
Publicité
