Philips Saeco Talea Ring Plus Mode D'emploi page 23

BeVerage settings
20
1
Check that the water tank and
coffee bean hopper are full; place
the cup under the dispensing head.
4
1.1 espresso coffee
1.
2.
Select the beverage to program.
Press the button to confi rm.
6
- +
espresso coffee
1.
2.
Change the coffee quantity by
navigating the click wheel with your
fi nger; confi rm with .
9
prebrewing: normal
espresso coffee
Press the button to select
the prebrew setting.
2
strong aroma
espresso coffee 08:33
Press the button.
When the settings are
changed, the message on the
display starts fl ashing.
When the changes are saved
the message stops fl ashing.
7
temperature: medium
espresso coffee
Press the button for more
than two seconds to access the
other programmable settings.
10
prebrewing: normal
espresso coffee
1.
2.
Change the prebrew value (normal, long, off) by navigating the click wheel
with your fi nger. Press the button to save.
Press the button to exit.
3
1 beverage settings
Select "beverage settings". Press
the button to confi rm.
5
medium aroma
espresso coffee
2.
1.
Press the button a few times
to adjust the quantity of coffee to
be ground or select the use of pre-
ground coffee.
Press the button to save.
8
temperature: medium
espresso coffee
1.
2.
Change the temperature setting
(high, medium, low) by navigating
the click wheel with your fi nger.
Press the button to save.
Prebrewing: the grounds are
slightly dampened before
brewing to bring out the full
aroma of the coffee and
enhance the fl avor.