Philips Saeco Talea Ring Plus Mode D'emploi page 10

first use - use after a lOng PeriOD Of inactiVitY
These operations ensure an optimum brewing and must be performed:
1) At fi rst start-up
2) When the machine remains inactive for a long time (more than 2 weeks).
1
Fill the tank with fresh drinking
water. Do not exceed the MAX
level indicated on the water tank.
Then place the water tank back.
4
At the end of the dispensing
phase, empty the cup. Repeat the
operations from step 2 for 3 times.
Then continue with step 5.
7
Turn the knob to the
position to start dispensing water.
2
Adjust the drip tray (see page 11)
and place a cup under the
dispensing spout.
5
Place a container under the hot
water wand.
8
Dispense water until the container
is full.
7
3
pre-ground
espresso coffee 08:33
2.
1.
Select the function by pressing the
button until the pre-ground
coffee option appears. Press
the button twice WITHOUT
adding pre-ground coffee.
6
selected
hot water
Press the button to select the
hot water function.
9
To stop dispensing, turn the knob
until it reaches the off position ( ).
Empty the container and repeat
the operations from step 5 until the
tank is completely empty.
The machine is ready.