Titan FLEXSPRAY Manuel De L'utilisateur page 11

Safety Cleanup
(continued)
7. Unplug the power cord.
Divide the spray gun. Push the Quick-
Change lever below the trigger (a), twist
and separate the front end from the
turbine.
8. Remove the 1 Qt. container and empty it.
9. Remove suction tube with container seal.
10. Clean suction tube (c) and suction nozzle
opening in front end assembly (d) with
cleaning brush.
11. Remove the adjustment ring (e) carefully
from the connecting nut (f). Unscrew
connecting nut (f), remove air cap (g),
nozzle (h) and nozzle seal (i).
Thoroughly clean all parts.
12. Gently clean the end of the needle (j) and
the needle opening with the cleaning
brush.
Wipe the outside of the front end
assembly and material container with a
damp cloth (be sure cloth is damp with
appropriate cleaning solution).
13. Lubricate the O-ring (k) on the rear of the
front end assembly with a thin layer of the
included petroleum jelly.
move on to "Reassembly", next page.
All manuals and user guides at all-guides.com
7
9
11
e
12
j
11
8
a
10
c
f
i
h
g
13
k
d
English