FRIGOGLASS Super 800 HC Manuel D'utilisation page 23

3. Refrigeration system:
• Check that the compressor is functioning properly.
• Check the starting relay, the overload and the capacitor. The Supplier recommends that the
compressor's starting relays and overloads be replaced every 3-4 years.
• Check the fan motor condenser and fan motor evaporator.
• Check that the thermostat or the electronic controller and its components are functioning
properly.
• Check the cooling performance of the ICM.
• Check the cooling circuit using the appropriate leak detector in case there is any concern or sign
of refrigerant leak.
1. Avoid damages resulting from improper installation & operation, improper maintenance &
cleaning, as well as improper handling and transportation, as per paragraphs 3, 5 and the
Appendix A above.
2. Do not perform unauthorised adaptations, modifications or adjustments to the cabinet.
GUIDELINES TO PREVENT CORROSION OF THE CABINET
APPENDIX C
ENG
23