Publicité
Les langues disponibles
Les langues disponibles
Display codes for alarms
5. Sliding Door blocking system*
To keep the doors open for loading, servicing or cleaning the cooler :
Step 1: remove the door blocking pin from position a
Step 2: slide the door fully open & insert the pin to the bottom frame hole, position b1 or b2 for locking
the left or right door respectively
Step 3: after finishing your job, remove the blocking pin & place it to its orifginal position a.
6. Care & cleaning
*
Optional feature
Door open – If the buzzer has been sounding for some time, the EMS25 will
enter the door open alarm mode. The alarm will stop after the door is closed.
If the alarm continues to sound after the door has been closed, ask for
technical support.
Refrigeration system failure – Ask for technical support.
Condenser high temperature – Unplug the appliance & clean the condenser.
If the problem continues, ask for technical support.
Probe failure 1 – Appliance probe failure, ask for technical support.
Probe failure 2 – Defrost probe failure1, ask for technical support.
PRIOR TO ANY CLEANING OR MAINTENANCE PROCEDURE, UNPLUG
THE ICM! REMOVE THE PLUG AND MAKE SURE THAT THE OPERATOR
CAN CHECK FROM ANY OF THE POINTS WHICH THEY HAVE ACCESS
THAT THE CABLE IS UNPLUGGED.
ENG
17
Publicité
