Publicité
Les langues disponibles
Les langues disponibles
ENG
4.2
Elstat EMS25
If your ICM is equipped with EMS25 electronic control, it features a fully automatic refrigeration control
system with energy saving capabilities. It is essential to know your controller prior to the installation of
the unit.
Display interface
There are 4 buttons on the control, which are intended only for service tasks. For access to setting
menus a specific password is required.
Button
Display codes for normal operation
16
Indicator
Teach
Menu
Up
Down
Cabinet temperature – operation mode
Standby mode
Defrost mode
Door open – If the door is not closed after certain time, an alarm buzzer starts
to sound.
Freeze-up protection – It is activated if ambient temperature falls below
zero. If ambient temperature is normal, ask for technical support.
1
Standby mode temperature disable (only for
models with night mode operation)
2
Motion detected (only for models with motion
detector)
3
Compressor on
Changes the controller mode from
operational mode to standby mode. It is
also used for browsing the menus.
For browsing between menus.
Changes the controller mode from standby
mode to operational mode. It is also used
for scrolling up in menus.
For scrolling down in menus and resetting
alarms.
Function
Publicité
