Other Symbols In This Documentation; Units Of Measurement; Standardised Output Data; Safety - Stiebel Eltron SHP-F 220 Premium Utilisation Et Installation

Masquer les pouces Voir aussi pour SHP-F 220 Premium:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

OPERATION

Safety

1.2

Other symbols in this documentation

Note
General information is identified by the adjacent symbol.
f Read these texts carefully.
f
Symbol
Meaning
Material losses
!
(appliance damage, consequential losses and environmen-
tal pollution)
Appliance disposal
f This symbol indicates that you have to do something. The ac-
f
tion you need to take is described step by step.
These symbols show you the software menu level (in
…
this example level 3).
1.3

Units of measurement

Note
All measurements are given in mm unless stated oth-
erwise.
1.4

Standardised output data

Explanations to determine and interpret the specified standardised
output data
Standard: EN 16147
The output data specifically mentioned in text, diagrams and
technical datasheets has been calculated according to the test
conditions of the standard shown in the heading of this section.
Generally, these standardised test conditions will not fully meet
the conditions found at the installation site of the system user.
Depending on the chosen test method and the extent to which this
method deviates from the conditions defined in the norm shown in
the heading of this section, any deviations can have a considerable
impact. Additional factors that have an influence on the test values
are the measuring equipment, the system configuration, the age
of the system and the flow rates.
A confirmation of the specified output data can only be obtained
if the conditions applicable to the relevant test match those of the
standard shown in the heading of this chapter.
2.
Safety
2.1

Intended use

The purpose of this appliance is to heat domestic hot water within
the application limits stated in the chapter "Specification / data
table".
The appliance is intended for domestic use. It can be used safely
by untrained persons. The appliance can also be used in non-do-
mestic environments, e.g. in small businesses, as long as it is
used in the same way.
4
| SHP-F 220-300 Premium
Any other use beyond that described shall be deemed inappro-
priate. Observation of these instructions and of the instructions
for any accessories used is also part of the correct use of this
appliance.
2.2

General safety instructions

The appliance should only be operated once it is fully installed
and all safety equipment has been fitted.
WARNING Injury
!
The appliance may be used by children aged 8 and older
and persons with reduced physical, sensory or mental
capabilities or a lack of experience and know-how, pro-
vided that they are supervised or they have been in-
structed on how to use the appliance safely and have
understood the potential risks. Children must never play
with the appliance. Children must never clean the ap-
pliance or perform user maintenance unless they are
supervised.
WARNING Electrocution
Contact with live components presents a threat to life.
Damage to the insulation or to individual components
may result in a threat to life.
f If there is damage to the insulation, switch off the
f
power supply and arrange a repair.
All work on the electrical installation must be carried
out by a qualified contractor.
WARNING Burns
The water in the DHW cylinder can be heated to temper-
atures in excess of 60 °C. There is a risk of scalding at
outlet temperatures in excess of 43 °C.
f Ensure you do not come into contact with the water
f
when discharged.
WARNING Burns
Touching hot components can lead to burns.
f When working on hot components, always wear
f
protective working clothing and safety gloves.
The pipework connected to the DHW outlet of the appli-
ance can reach temperatures in excess of 60 °C.
WARNING Burns
In the case of a fault, temperatures up to the high limit
safety cut-out limit can occur (see chapter "Specifica-
tion / Data table").
WARNING Burns
The appliance is filled with refrigerant at the factory.
In the event of refrigerant escaping due to a leak, avoid
coming into contact with the refrigerant or inhaling the
released vapours. Ventilate the rooms affected.
WARNING Electrocution
Never operate the appliance when the casing is open,
without a cover, or without side air connectors.
www.stiebel-eltron.com

Publicité

Chapitres

Table des Matières
loading

Ce manuel est également adapté pour:

Shp-f 300 premiumShp-f 300 x premium

Table des Matières