Operation; Other Symbols In This Documentation; Units Of Measurement; Safety - Stiebel Eltron SBB 300 Trend Utilisation Et Installation

OPERATION

Safety

1.2

Other symbols in this documentation

Note
General information is identified by the symbol shown
on the left.
f Read these texts carefully. f
Symbol Meaning
Material losses
!
(appliance damage, consequential losses and environmen-
tal pollution)
Appliance disposal
f This symbol indicates that you have to do something. The ac- f
tion you need to take is described step by step.
1.3

Units of measurement

Note
All measurements are given in mm unless stated oth-
erwise.
14 | SBB Trend
314455-40297-9266_SBB_300-500_Trend_de_en_fr_pl_da_fi.indb 14
2. Safety
2.1

Intended use

The appliance is intended for domestic use. It can be used safely
by untrained persons. The appliance can also be used in a non-do-
mestic environment, e.g. in a small business, as long as it is used
in the same way.
The appliance is intended for heating domestic hot water in
conjunction with solar collectors and optionally with other heat
sources to reheat the upper half of the cylinder. As an option, by
connecting the two internal indirect coils, the appliance can be
used to heat DHW via heat pumps.
Any other use beyond that described shall be deemed inappropri-
ate. Observation of these instructions and of instructions for any
accessories used is also part of the correct use of this appliance.
2.2 Safety instructions
WARNING Burns
There is a risk of scalding at outlet temperatures in ex-
cess of 43 °C.
WARNING Injury
!
The appliance may be used by children aged 8 and up and
persons with reduced physical, sensory or mental capa-
bilities or a lack of experience and know-how, provided
that they are supervised or they have been instructed on
how to use the appliance safely and have understood
the resulting risks. Children must never play with the
appliance. Children must never clean the appliance or
perform user maintenance unless they are supervised.
Material losses
!
The appliance is pressurised.
During the heat-up process, expansion water will drip
from the safety valve. If water continues to drip when
heating is completed, please inform your qualified con-
tractor.
2.3

Test symbols

See type plate on the appliance.
www.stiebel-eltron.com
11.10.2017 07:40:33