Télécharger Imprimer la page

Toro 21356 Manuel De L'utilisateur page 24

Masquer les pouces Voir aussi pour 21356:

Publicité

Les langues disponibles

Les langues disponibles

Problem
The LED indicator light on the battery
charger is blinking red.
The machine is producing a beeping
sound.
The quality of cut is decreased or
unsatisfactory.
The bagging is decreased or
unsatisfactory.
The machine is cutting unevenly.
The machine is vibrating.
Possible Cause
1. There is an error in the communication
between the battery pack and the
charger.
2. The battery pack is weak.
1. The battery pack is not charged.
2. The machine is in an unsafe position
for operation.
3. The machine is overloaded.
4. There is another electrical problem
with the machine.
1. The blade is dull.
2. The cutting deck has debris buildup.
1. The machine is overloaded
1. The blade is dull.
2. The cutting deck is damaged.
1. The blade is bent or damaged.
22
Corrective Action
1. Remove the battery pack from the
battery charger, unplug the battery
charger from the outlet, and wait 10
seconds. Plug the battery charger into
the outlet again and place the battery
pack on the battery charger. If the LED
indicator light on the battery charger is
still blinking red, repeat this procedure
again. If the LED indicator light on
the battery charger is still blinking red
after 2 attempts, properly dispose of
the battery pack at a battery recycling
facility.
2. Contact your authorized service dealer
if the battery is in warranty, or properly
dispose of the battery pack at a battery
recycling facility.
1. Remove the battery pack from the
machine and charge it.
2. Ensure that the machine is not at an
extreme angle while operating.
3. Cut the grass at a higher height of cut
or walk at a slower pace while mowing.
4. Attempt the other troubleshooting
actions, if the alarm still sounds,
contact an Authorized Service Dealer.
1. Have the blade sharpened or replaced.
2. Clean under the machine.
1. Cut the grass at a higher height of cut.
1. Have the blade sharpened or replaced.
2. Contact an Authorized Service Dealer.
1. Inspect the blade and replace if
necessary.

Publicité

loading

Ce manuel est également adapté pour:

Flex-force power system 60v max21356t