Publicité
Les langues disponibles
Les langues disponibles
During Operation
Starting the Machine
1.
Ensure that the battery pack is charged and installed in the machine; refer to
(page
11).
2.
Insert the electric-start button into the electric starter switch (A of
3.
Squeeze the blade-control bar and hold it to the handle (B of
4.
Press the electric-start button and keep it pressed until the motor starts (C of
Using the Self-Propel Drive
•
To engage the self-propel drive, pull the
self-propel-drive bar to the handle and hold it
(Figure
11).
Note:
The maximum self-propel-drive speed is
fixed. To reduce the speed, increase the space
between the self-propel-drive bar and the handle.
•
To disengage the self-propel-drive, release the
self-propel drive bar.
Note:
To reduce the ground speed, increase the
space between the self-propel drive bar and the
handle.
1. Self-propel-drive bar
Figure 11
Figure
Figure
Figure 10
g240765
13
Installing the Battery Pack
10).
10).
Figure
10).
g332149
Publicité
