Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Picture quality

Symptom
The picture is out of
focus.
The picture is too dark.
The colors of the
picture taken indoors
are not correct.
A part of the picture is
missing.
Printer/Station
Symptom
The printer does not print. • Connection may not be correct.
Possible causes/Action
• Focus is off.
t Check the distance between the lens and the
subject and place the subject at the range within
which the focus is in.
• The camera was moved when you pressed the
release button.
t Hold the camera correctly, then press the release
button slowly.
• The lens is dirty.
t Clean the lens.
• The flash was blocked by a finger or other obstacle.
t Hold the camera correctly, and make sure nothing
blocks the flash.
• The subject was too far away.
t Take the picture within range of the flash.
• The subject was backlit.
t Use the flash.
• This is due to fluorescent lighting.
t Set the white balance correctly.
• A finger was blocking the lens.
t Hold the camera correctly, and make sure a finger
does not block the lens.
Possible causes/Action
t Check connections and rectify, if necessary.
• Either paper or ink ribbon cartridge is not loaded.
t Load the paper or ink ribbon.
55

Publicité

Table des Matières
loading

Table des Matières