Sony UPX-C21 Mode D'emploi page 11

Rear
qf
qd
1 Flash mode button (Refer to the Operating
Instructions (Advanced Operations).)
Selects the flash mode. Each time you press this
button, the setting changes cyclically.
A : The lighting conditions are detected
automatically by prelighting (automatic
photometry function), and the optimum shutter
speed is selected. If necessary, the built-in strobe
lights at the optimum level.
: The built-in strobe always lights at the optimum
level determined by prelighting. The shutter
speed is fixed at 1/250 second, and exposure is
controlled automatically.
E: The built-in strobe always lights. The shutter
speed is fixed at 1/250 second, and exposure is
controlled automatically for a distance of 1.2
meters between the subject and the lens. This
distance is recomended for shooting with the
built-in and external strobes.
: The built-in strobe does not light. The optimum
shutter speed is selected by automatically
detecting the lighting conditions.
P L A Y
C A M
E R A
W
T
L C D
M O N
IT O R
O N
O F F
M O D
E
S E T
qs
qa
0
E: The built-in strobe does not light, but only the
external strobe lights. The shutter speed is fixed
at 1/250 second.
: The redeye effect that may occur in flash
shooting is reduced by prelighting several times.
Other operations are the same as with A .
2 H/S (picture resolution mode) button (Refer to
the Operating Instructions (for Advanced
Operations).)
Selects the picture quality. Each time you press the
button, the setting changes cyclically.
S: High-resolution mode (640 × 480).
Up to 30 pictures can be taken.
Hi1: Super-high-resolution 1 mode (1280 × 960).
Five or more pictures can be taken.
Hi2: Super-high-resolution 2 mode (1280 × 960).
Ten or more pictures can be taken.
1
2
3
4
5
6
7
8
9
11