Sony UPX-C21 Mode D'emploi page 35

Setting power save mode
In power save mode, the camera is automatically set to the status equal to
power off after 3 minutes has passed with no operation. To restore power,
set the POWER switch to OFF then ON again. If the PLAY/CAMERA
switch is set to CAMERA, half-pressing the release button also restore
power.
1
When the SET UP display is shown on the LCD, press B of the mode
button so that the select mark points to POWER SAVE, then press
SET of the mode button.
The POWER SAVE ON/OFF display appears.
P OWER
S AV E
ON OFF
2
Press b or B of the mode button to select ON, then press SET of the
mode button.
Power save mode is set.
To cancel power save mode
Select OFF in step 2 above, then press SET of the mode button.
35