Locations Of Parts; Camera - Sony UPX-C21 Mode D'emploi

Locations of Parts

For details, see the pages shown in parentheses.

Camera

Front
1
1 Release button (37)
Press to take a picture shown on the display and record
it in the camera memory.
2 Strobe shoe (Refer to the Operating Instructions
(Advanced Operations).)
Attach an external strobe. When an external clip-on
strobe is attached, the strobe will light synchronized
with shutter operation.
3 Strobe (37)
Lights according to the selection made with the flash
mode button.
4 FLASH jack (Refer to the Operating
Instructions (Advanced Operations).)
Connect a cord from an external strobe.
5 VIDEO OUT jack (RCA phono) (Refer to the
Operating Instructions (Advanced Operations).)
If a video monitor is connected using an optional video
cable, you can view a picture displayed on the LCD on
the monitor's screen.
10
H
F L A S
O O U
V ID E
V IN
D C 8 .4
0
9
6 RELEASE jack (minijack) (Refer to the
Operating Instructions (Advanced Operations).)
Connect an optional remote release.
7 RS-232C jack (minijack) (28)
To use the camera far from the station, connect to the
CAMERA jack of the station using the supplied
connecting cable.
8 DC8.4V IN jack (26)
Connect an optional AC power adaptor. The power is
supplied to the camera.
9 Lens (f = 12 to 15.6 mm, f-4 to f-4.7)
Auto focus lens.
0 Viewfinder (39)
You can see the subject through the viewfinder and
can shoot a picture without using the LCD monitor.
2
3
4
5
A S E
R E L E
T
6
7
3 2 C
R S -2
8