Station - Sony UPX-C21 Mode D'emploi

qs Tripod screw hole (36)
Used to attach the camera to the tripod. A quick shoe
can be also attached.
qd Standby lamp (37)
The lamp is lit or flashing to indicate the following
conditions when the PLAY/CAMERA switch is set to
CAMERA.
Flashing in red: Preparing for recording, charging
the flash, storing the data (recording is disabled).
Lit in red: Memory full
Flashing in green: Manual setting for exposure, iris
or white balance
Lit in green: Standby for recording

Station

qd
qs
1 Camera attachment part (27)
Attach the camera here.
2 Metal contacts
For connection with the camera. Always keep them
clean. If they become dirty, clean them with a cotton
swab, etc.
PRINTER DC IN
qf qg
C A M
E R A
qf Viewfinder (39)
You can see the subject through the viewfinder and
can shoot a picture without using the LCD monitor.
1 2
3 POWER/BUSY lamp (48)
Lights in green when the connected printer is turned
on. Blinks in red while image data is being transmitted
from the camera to the station. Do not remove the
camera from the station while this lamp is blinking in
red.
3
4
5
6
7
8
9
0
qa
13