Recording The Video Picture As A Still Image - Sony FVP-1/1E Mode D'emploi

Recording the video picture as
a still image
Re-selecting the image
Press PICTURE. The
playback picture appears
on the screen. Follow step
2.
If you press CLEAR ALL,
the printer is reset to
stand by mode.
Perform printing
procedures from the
beginning.
36 GB
Making Various Prints
You can record the playback picture from the video
equipment as a still image onto the floppy disk.
You can view the image with the Digital Mavica,
process the image with the printer utility on your PC,
or save the image as a general image file.
Before you begin
1 Turn on the printer and television and set the input
selector of the television to "VIDEO."
2 Set INPUT SELECT to "VIDEO MOTION" or
"VIDEO STILL."
1
Set print mode dial to "
2
Select the image to be recorded.
For details of operating procedures, refer to the
pages for the corresponding printing mode.
1 Turn on and start playback on the video
equipment.
2 Press CAPTURE when the picture you want to
record appears on the screen.
3
Insert the floppy disk into the floppy disk slot.
Insert a floppy disk formatted in the MS-DOS
format. Check that the write protect switch on the
disk is set to the write enable position.
(standard)."