Troubleshooting - Sony FVP-1/1E Mode D'emploi

Troubleshooting

If you run into any problems using the printer, use the
following table to troubleshoot the problem.
If the problem persists, consult your Sony dealer.
When you use the printer with the printer utility, see
also the User's Guide for Printer Utility.
Cannot operate the printer after the power switch
is turned on.
m Connect the AC power cord to an AC outlet
securely (page 10).
The television displays no images.
m Set the input selector of the television to "VIDEO."
m Turn on the printer and connected devices
including the television and the video equipment.
m Connect the printer to the television and video
equipment (page 9).
m Insert a floppy disk which is formatted in the MS-
DOS format properly. Check that images are
recorded on the inserted floppy disk.
m Start playback on the video equipment.
m Set INPUT SELECT to appropriate position.
Error message appears on the TV screen.
m Refer to "If an error message appears" on page 42.
Cannot remove the print cartridge.
m Turn the printer off then on. After the motor
sound stops, try to remove the cartridge (page 15).
Printing takes longer than usual.
m If the printing indicator is flashing, see "If the
indicators are on" on page 43.
For Your Information
41 GB