If An Error Message Appears - Sony FVP-1/1E Mode D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Troubleshooting (continued)
42
GB
For Your Information
Cannot print.
m Insert the print paper (page 16).
m Try printing again after removing the print paper
if the print paper has emerged from the paper
outlet at the rear.
m See "If the indicators are on" on the next page.
m Insert the print paper if you use the optional
automatic feeder (page 17).
m Insert the print cartridge (page 14).
m Use the proper set of the print cartridge and print
paper (page 13).
The beeps sound.
m Check that you operate with the correct
procedures.
m See "If the indicators are on" on the next page.

If an error message appears

NO DISK
m The floppy disk is not inserted. Insert the floppy
disk into the floppy disk slot.
DISK ERROR
m The inserted floppy disk is not formatted, or there
is something wrong with the disk. Format the
floppy disk in the MS-DOS format (512 byte × 18
sector) using the Digital Mavica or your PC.
DISK PROTECT
m The write protect tab on the inserted floppy disk is
set to the write protect position. Set it to the write
enable position and then record the image.
DISK FULL
m There is not enough space to record the image.
Delete unnecessary images, or use a new floppy
disk.

Publicité

Table des Matières
loading

Table des Matières