Husqvarna K1270 II Manuel D'utilisation page 71

6. Remove the nut on the rear belt guard and remove
the rear belt guard.
7. Replace the drive belt.
8. Assemble in opposite sequence. To install the
cutting blade, refer to
page 55 .
988 - 001 - 21.10.2019
To install the cutting blade on
To adjust the tension of the drive belt
The tension of the drive belt is correct when the
adjustment nut is opposite the mark on the drive belt
cover.
1. Loosen the 2 bolts that hold the cutting head to the
cutting arm.
71