Maintenance; Maintenance Schedule - Husqvarna K1270 II Manuel D'utilisation

Introduction
WARNING: Read and understand the safety
chapter before you do maintenance on the
product.
For all servicing and repair work on the product, special
training is necessary. We guarantee that professional
repairs and servicing is available. If your dealer is not a
service agent, speak to them for information about the
nearest service agent.

Maintenance

Clean the external surfaces
of the product.
Clean the cold air intake.
Clean the spark plug.
Clean the fuel tank.
Do a general inspection.
Examine the throttle lock-
out*.
Do a check of the stop
switch*.
Examine the blade guard*.
Examine the cutting bla-
de**.
Do a check for fuel leaks.
Do a check of the water de-
livery system.
Do a check of the vibration
damping system*.
Examine the muffler*.
Examine the drive belt.
Examine the carburetor.
Examine the starter hou-
sing.
Examine the fuel system.
Examine the air filter.
Examine the drive gear and
the clutch.
68
Maintenance
Daily
X
X
X
X
X
X
X
X
X
For spare parts, speak to your Husqvarna dealer or
service agent.

Maintenance schedule

The maintenance schedule shows the necessary
maintenance of the product. The intervals are calculated
on daily use of the product.
For maintenance identified with * refer to instructions in
Safety devices on the product on page 49 . For
maintenance identified with ** refer to instructions in
Cutting blades on page 52 .
Weekly
X
X
X
X
X
Monthly
X
X
X
X
X
988 - 001 - 21.10.2019