Husqvarna K1270 II Manuel D'utilisation page 46

Read the operator's manual carefully and
make sure that you understand the
instructions before you use this product.
Use approved protective helmet, hearing
protection, eye protection and respiratory
protection. Refer to
equipment on page 49 .
This product complies with applicable EC
Directives.
Dust forms when cutting. The dust can
cause injuries if inhaled. Use an approved
respiratory protection. Avoid inhaling
exhaust fumes. Always provide for good
ventilation.
WARNING! Kickbacks can be sudden, rapid
and violent and can cause life threatening
injuries. Read and understand the
instructions in the manual before using the
product. Refer to
Sparks from the cutting blade can cause fire
in fuel, wood, clothes, dry grass or other
flammable materials.
Make sure that the cutting blade does not
have cracks or other damages.
Do not use circular saw blades.
Choke
Air purge bulb
Decompression valve
46
Personal protective
Kickback on page 58 .
Starter rope handle
Use a fuel mixture of gasoline and oil.
Noise emission to the environment complies
with applicable EC Directives. The noise
emission of the product is specified in
Technical data on page 80 and on the
label.
Note: Other symbols/decals on the product refer to
special certification requirements for some markets.
Start instructions decal
To start the product with a cold engine on page
Refer to
63 and To start the product with a warm engine on
page 64 for instructions.
Cutting equipment decal
1
5
1. Cutting blade diameter
2. Max. speed of output shaft
3. Max. blade thickness
4. Direction of rotation
5. Bushing dimension
3
4
5
2
988 - 001 - 21.10.2019