Keypad Lock Settings; Wireless Equipment Coding Setting - Evolu7 Link Guide D'utilisation


Keypad lock setting
Keypad lock could help the host password can not be changed
maliciously.
In setup state, press [35], then input [0/1], finally press [#] to
confirm. Host makes a long beep.
completed, please enter instruction.
Operating： 【35】【X】【#】
X="0" indicates：
don't need to be entered
X= "1" indicates
should be entered.
Example ：Open the keypad lock；
Operating： 【35】【1】【#】


Wireless Equipment Coding Setting

The code need to be same as the code of wireless alarm, if it
could be work with alarm system when alarm.
In setup status, press [36] + 8 wireless equipment coding, then
enter [#] to confirm. Host make a long beep. A "setting completed,
please enter the instruction" voice prompt appears.
Wireless equipment coding include sc2262 coding four data bits,
and 8 address
Operating method
XXXXXXXX indicates：8 wireless equipment coding
Example: detailed operating of wireless equipment coding
is"01020102"
Operation:【36】【

Timed Arm
Timed arm or disarm is convenient to arm or disarm at the
necessary time.
In setup status, press [37], and then input Hour of arming time
[XX] in every time ,and then input minute of arming time[YY],
finally press [#] to confirmed. Host make a long beep.
Keypad lock is off. Arming/disarming, password
: Keypad lock is on. Arming/disarming, password
： 【36】【XXXXXXXX】【#】
01020102
50
A voice prompt: setting
】【#】
A