Table des Matières
Publicité
Please plug out the antenna for better signal.
If the low-power indicator is on, please change the battery.
Wireless PIR detector
PIR detectors are used to detect the
movement within a certain range.
Fix the adjustment bracket on
the wall with the provided
screws
and
detector to the bracket. It is
recommended to mount it at a
height of 2-2.2m above the
floor.
Effect of the PIR detection is best when the detection direction is in 90°
angle with the walking direction of the intruder. Choose the most
suitable installation place and angle according to actual situation and
taking the following installation diagram as reference to ensure the
detection effect is best.
Please do not fix it under direct sunlight or other strong lights and also
keep it away from places with frequent strong air stream.
If the low-power indicator is on, please change the battery.
Function Settings
30. Initialization
Please insert SIM card and plug in power adaptor, and then power on the
system, all the LED lights will be on for 2 seconds and you will hear a
long beep; the system comes into initialization. After the time clock
displays on the LCD screen, the [SGM] starts flashing and the main unit
starts to detect the GSM network until a long beep. Then the [SGM]
indicator goes out indicating the system comes into disarm status.
Finally, turn on the backup battery switch.
attach
the
57
Publicité
Chapitres
Table des Matières
