Alarm Number Setting; Delete Phone Number - Evolu7 Solar Guide D'utilisation

44. Time Setting of Alarm Delay (Default: 40 sec)
In setup state, input the command: 45 + [XX] + #
XX indicates: the delay time of alarm; XX= 01-99: 1 sec to 99 sec
Note: The setting is effective only when a zone is set as Alarm Delay
Zone.
Note: Before the system enters arm or alarm status it will emit a "Di"
sound per second.

45. Alarm Number Setting

In setup state, input [51] ~ [56], then input the voice alarm-receiving
number (mobile number or telephone number), and then press [#] to
confirm. The main unit will make a long beep, the [Signal] indicator will
flicker once, and you will hear "setting completed", which indicate voice
alarm-receiving number is set successfully.
Operating method: [XX]  [YY...YY]  [#]
XX indicates: the 1- 6 alarming user number [51] ~ [56]
YY...YY indicates: voice alarm-receiving phone number
For example: set 13811111111 as the first voice call number
Operating method: [51]  [13811111111]  [#]
LCD display:

46. Delete Phone Number

In setup state, input [51] ~ [56], and then press [#] to confirm, the main
unit will make a long beep and the [Signal] indicator will flicker once and
you will hear "delete completed", which indicate the alarming user
number is deleted successfully.
Operating method: [XX]  [#]
XX indicates: the 1- 6 alarming user number [51] ~ [56]
For example: Delete the third alarming user number from the system.
Operating method: [53]  [#]
LCD display:
64