Disarm; Telephone Alarm Receipt - Evolu7 Link Guide D'utilisation

3. Individual arm
Host's random combination of 100 defense zones could be
used for defense through individual defense function. First
press [#] to clear the keypad. Press defense zone of [01~99]
and press [
defense zone light is on for one second indicating successful
individual defense. Repeat the said operations for the
defense in other zones.
Keypad operation: 【01～99】 + 【
4.

Disarm

Disarm refers to that the alarm is stopped; or the main host
is enabled in non-warning status. In detector triggering after
disarming, the host will not alarm (except for 24h defense
and emergency alarm button). After disarm, [ARM] and
[Home] go off.
Remote operation: press remote control【
Keypad operation: [Disarm
5.

Telephone alarm receipt

Host in defense status, once the alarm signal is received,
will immediately enable and sound the alarm; meanwhile all
pre-set phone (mobile) numbers will be automatically dialed
for alarm. The host will automatically dial up next phone
group in case of no answering of dialed phone number, and
then all preset phone numbers will be dialed in repeated
form for three times respectively. If alarm phone is answered,
alarm information is heard from telephone receiver, such as
"Alarm for the balcony in the 5
is ...". And the keypad of phone (mobile) is pressed to
perform remote control of the console.
Press [1]: Stop alarm and arm, no longer dials up next
]. The buzzer sounds "beep", and meanwhile
[Disarm
【#】( Keypad lock is on)
59
】
](Keypad lock is off) or
]+【User's Password】 +
th
defense zone, and this
】.